- 18
SIZE
LARGE
3.8m
0dB
DISTANCE
LEVEL
SET THE SPEAKER SIZE, DISTANCE FROM LISTENING POINT, AND THE SOUND
LEVEL TO EACH SPEAKERS.
MENU [SPEAKER SETTINGS]
SELECT
ENTER
RETURN
EXIT
LS
2.0m/0dB
3.8m/0dB
L
3.8m/0dB
C
3.8m/0dB
R
SW
0dB
RS
2.0m/0dB
34
Select option.
34
Select the corresponding parameter respectively.
SIZE
Select the option
LARGE
if the largest speaker in the box has
a diameter of 16 cm or more. Otherwise select
SMALL
. If you
do not have speakers connected, select
NO
.
DISTANCE
Set the distance from the selected speaker to your listening
position.
LEVEL
Set the output level to between -6 dB and +6 dB.
Confirm
OK
.
Testing Speaker Settings
3456
Select the button
TEST START
.
Confirm
OK
.
You will hear test sounds from the speakers one after the
other. If the volume of the sounds differs too much, correct the
setting
LEVEL
.
6
To do so, select the button
TEST TONE STOP
and confirm
with
OK
.
Select the required speaker and set the parameters as
described above.
6
Once you have finished with the speaker settings, select the
button
END
and confirm with
OK
.
➠
The distance of the speakers
L
and
R
are shifted equally.
➠
The speakers
L
and
R
are automatically set to
LARGE
if
NO
subwoofer is selected.
Quick start
If quick start is enabled, the start-up time from standby mode will be shortened.
However the voltage consumption in standby increases slightly (page 8).
56
In the menu
SETTINGS
select the option
QUICK
START
.
Confirm
OK
.
MENU [QUICK START]
SELECT
ENTER
RETURN
EXIT
IF QUICK START IS ENABLED, THE START-UP TIME FROM
STANDBY MODE WILL BE SHORTENED.
DO YOU WANT TO TURN ON THIS FUNCTION?
YES
NO
34
Select option
YES
.
Confirm
OK
.
Auto Power Off
The Player will automatically switch to standby mode after 10 minutes when no
activity is detected.
56
In the menu
SETTINGS
select the option
AUTO POWER
OFF
.
Confirm
OK
.
MENU [AUTO POWER OFF]
SELECT
ENTER
RETURN
EXIT
WHEN AUTO POWER OFF MODE IS SET, THE UNIT WILL SWITCH TO
STANDBY MODE AUTOMATICALLY AFTER 10 MINUTES WHEN NO
ACTIVITY IS DETECTED.
DO YOU WANT TO ACTIVATE THIS FUNCTION?
YES
NO
34
Select option
YES
.
Confirm
OK
.
Initial Set-up
