[VCR FUNCTIONS] iliUpa [CAMERA FUNCriONS]
m±L
[OTHER FUNCTiONSi
[DISPLAYKH/TO
®
C
all
:
(SiS&lg^)
© MEMORY :
(-► 134)
0 PARTIAL :
•
mm
■
[ALL]"
o OFF :
mH-Bf
it№MT -
^
=
C
all
:
©MEMORY:
(-M34)
©OFF :
Mlf0^§§fg^
■ Changing the Tape Counter Indication
By changing the setting for [DISPLAY] on the [OTHER
FUNCTIONS] Sub-Menu of the [VCR FUNCTIONS] or the
[CAMERA FUNCTIONS] Main-Menu, the Counter Display
Mode can be changed in the order shown in the above
illustrations 0~0-
Camera Mode ®
0 ALL:
Elapsed Tape Time Indication (initial setting)
0 MEMORY:
Memory Stop Indication and Elapsed Tape
Time Indication (-♦ 134)
0
PARTIAL:
No Counter Indication
Only a few indications are displayed so that all parts of the
picture can be seen clearly. However, when you turn on
the Movie Camera, all indications initially appear for a few
seconds to inform you of the selected settings.
• In this condition, if you switch the Movie Camera over to
the VCR Mode and then back to the Camera Mode, [ALL]
is automatically selected for the Tape Counter Indication.
0 OFF:
No Counter Indication
In this mode, only the Operation Mode Indications and
Warning/Alarm Indications can appear. However, when
turning on the Movie Camera, all indications appear for a
few seconds to inform you of the selected settings.
VCR Mode (B)
0 ALL:
Elapsed Tape Time Indication (initial setting)
0 MEMORY:
Memory Stop Indication and Elapsed Tape
Time Indication (-♦ 134)
e OFF:
No Counter Indication
In this mode, only the Operation Mode Indications and
Warning/Alarm Indications can appear.
132