[Страница 19/54] - Руководство по эксплуатации: Магнитофон / музыкальный центр ROTEL RSX-1560

Инструкция для ROTEL RSX-1560

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

English

RSX-1560 Surround Sound Receiver

English

RSX-1560 Surround Sound Receiver

Three sets of inputs, labeled COMPONENT VIDEO IN 1–3, accept
Component video signals from source components.

High Deﬁnition TV Monitor Outputs

The TV MONITOR outputs of the receiver send the video signal to your
TV monitor. Four types of video output connections are provided – HDMI
digital video, Component Video, S-Video, or RCA composite video.
HDMI or Component Video outputs must be used for connections to an
HDTV in order to view high resolution HDTV video. In most cases, HDMI
or Component Video connections can be the only video connection to the
HDTV.

The HDMI outputs can send all enhanced or high deﬁnition video
signals to a high-deﬁnition TV (480p/576p, 720p, 1080i, or 1080p).
The Component Video outputs can also send all of these signals except
1080p. 480i/576i standard deﬁnition resolution is not available at the
Component Video or HDMI outputs since the receiver is designed to
upconvert these signals to a high deﬁnition resolution.

Note:

Do not connect HDMI and Component Video outputs to a

monitor simultaneously, as the two video image signals may affect

each other.

The output resolution is speciﬁed in the VIDEO/HDMI setup menu. All
signals from all video sources (any resolution) are converted to the
desired resolution.

Note:

HDMI video signals cannot be converted to Component

Video output.

Note:

When you have changed the output resolution in the

VIDEO/HDMI menu during operation, restart by switching power

OFF and ON again, to stabilize the picture image in the new

resolution setup.

Additional information for high deﬁnition outputs:

• Typically, choose the HDMI outputs with digital high-deﬁnition TVs

such as LCD, plasma, or DLP monitors. Use the Component Video
connections with analog high deﬁnition TVs such as CRT-based direct
view or projection monitors.

• HDTV Component Video output is subject to HDCP copy protection.

It may not display 720p or 1080i resolution when the source signal
incorporates copy protection. However, when Video Out is set to
480p/576p in the VIDEO/HDMI menu, all sources will be available.

• The video signal sent to the TV through the HDMI connection will not

be displayed properly unless all HDMI components in the system,
including the TV monitor, are compatible with the HDCP copy
protection standard.

• Only audio signals passed-through directly from the source

component are sent to the TV set through the HDMI connection. To
send decoded audio from the receiver to the TV, you must select ‘TV
mode’ in the VIDEO/HDMI menu.

• TV monitors with DVI-D connections can usually be connected to

the HDMI output of the receiver with the use of an appropriate
24-pin DVI-HDMI adaptor. However, there are occasionally some
incompatibilities with older DVI-D equipped monitors.

• Use the scaler setting of the receiver’s ‘VIDEO OUT FORMAT’ in the

VIDEO/HDMI menu to match the native resolution of the TV monitor.

Standard Deﬁnition TV Monitor Outputs

The S-Video or Composite Video TV MONITOR outputs of the receiver
send the video signal to a standard deﬁnition TV monitor.

These video outputs can only send a 480i/576i standard deﬁnition
video signal to a TV. They can only output video signals from a standard
deﬁnition 480i/576i component. Signals from progressive scan DVD
players or other high deﬁnition sources cannot be downconverted to
standard deﬁnition for S-Video or Composite Video.

In most cases, S-Video outputs will provide better picture quality than
Composite Video.

Note:

Component Video 480i/576i inputs can be passed to S-

Video and Composite Video outputs.

ZONE 2–4 VIDEO Outputs

The ZONE VIDEO outputs of the receiver send a Composite or S-Video
signal to a TV monitor in Zone 2, Zone 3, or Zone 4.

Note:

Only Composite input signals are available at the ZONE

VIDEO outputs.

Audio Inputs & Outputs

This Rotel receiver provides both analog and digital audio connections.

Digital Inputs

The receiver accepts digital inputs from source components such as
CD players, satellite TV tuners, and DVD players. The built-in digital
processor senses the correct sampling rates.

Note:

With a digital input connection, the receiver will be used

to decode the signal, rather than the source component’s internal

decoders. You must use digital connections for a DVD player that

supplies a Dolby Digital or DTS signal; otherwise the receiver will

not be able to decode these formats.

There are seven digital inputs on the rear panel, three coaxial and four
optical, as well as the HDMI Audio input that is carried by the HDMI
cables along with the digital video signals. These digital inputs can
be assigned to any of the input sources using the INPUT SETUP screen
during the setup process. For example, you can assign the COAXIAL 1
digital input connector to the VIDEO 1 source and the OPTICAL 2 digital
input to the VIDEO 3 source. By default, the source input buttons are
factory conﬁgured to select the following inputs:

CD:

Digital Coaxial 2

Tuner:

Analog

Tape:

Digital Coaxial 3

Video 1:

HDMI Audio (HDMI 1)

Video 2:

HDMI Audio (HDMI 2)

Video 3:

Digital Optical 1

Video 4:

Digital Optical 2

Video 5:

Digital Coaxial 1

RSX-1560 English v2.indd 19

29/9/08 15:15:55

Оглавление инструкции

Страница 1 из 55
RSX-1560 Surround Sound Receiver Owner’s Manual RSX-1560 English v2.indd 1 Register your product at www.Rotel.com/register 29/9/08 15:13:46
Страница 2 из 55
RSX-1560 Surround Sound Receiver 2 > 10 cm > 4 in > 10 cm > 10 cm > 4 in > 4 in > 10 cm > 4 in Rotel products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and
Страница 3 из 55
English 3 Notice Important Safety Instructions The COMPUTER I/O connection should be handled by authorized persons only. WARNING: There are no user serviceable parts inside. Refer all servicing to qualiﬁed service personnel. FCC Information This equipment has been tested and found to comply with
Страница 4 из 55
RSX-1560 Surround Sound Receiver 4 1: Controls and Connections � �� *8 � 7* � � � �� * Please note: when installing in a rack-mounting system, secure the unit to the rack RSX-1560 English v2.indd 4 29/9/08 15:14:03
Страница 5 из 55
English 5 2: RR-1061 Remote This remote control may be supplied with alternative Rotel products. As a result some of the buttons may not apply to this particular model. ��
Страница 6 из 55
6 RSX-1560 Surround Sound Receiver 3: Connecting the Speakers �� CAUTION RSX-1560 English v2.indd 6 29/9/08 15:14:16
Страница 7 из 55
English 7 4: Digital Video Connections �� RSX-1560 English v2.indd 7 29/9/08 15:14:26
Страница 8 из 55
RSX-1560 Surround Sound Receiver 8 5: TV Analog Connections �� 6: DVD Player Analog Connections �� RSX-1560 English v2.indd 8 ��
Страница 9 из 55
English 9 7: DVD-A or SACD Player Connections �� 8: Cable, Satellite, or HDTV Analog Connections �� RSX-1560 English v2.indd 9 ��
Страница 10 из 55
RSX-1560 Surround Sound Receiver 10 9: Video Recorder Analog Connections �� 10: CD Player Connections �� RSX-1560 English v2.indd 10 29/9/08 15:15:15
Страница 11 из 55
English 11 11: Audio Recorder Connections �� 12: AM and FM Antennae Connections RSX-1560 English v2.indd 11 29/9/08 15:15:33
Страница 12 из 55
RSX-1560 Surround Sound Receiver 12 13: On-Screen Menus ��
Страница 13 из 55
English 13 Contents Boxed numbers refer to RSX-1560 illustration. Circled letters refer to RR-1061 illustration. FCC Information 3 Caution 3 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1: Controls and Connections 4 2: RR-1061 Remote
Страница 14 из 55
RSX-1560 Surround Sound Receiver 14 PIP Button POP Button Basic Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power and Standby On/Off 2gTT Volume Adjustments =Q Muting the Sound eR Selecting Inputs . . . . . . . . . . . . . . . . . . . . .
Страница 15 из 55
English 15 About Rotel Getting Started Our story began nearly 50 years ago. Over the decades, we have received hundreds of awards for our products and satisﬁed hundreds of thousands of people who take their entertainment seriously – like you! Thank you for purchasing the Rotel RSX-1560 Surround
Страница 16 из 55
RSX-1560 Surround Sound Receiver 16 Surround features Unpacking • Seven built-in ampliﬁer channels, each delivering 100 watts (all channels driven). Remove the unit carefully from its packing. Find the remote control and other accessories. Save the box as it will protect the product if you move or
Страница 17 из 55
English 17 OVERVIEW OF CONNECTIONS When making signal connections, connect LEFT channels to LEFT channel jacks and RIGHT channels to RIGHT channel jacks. All RCA-type connections on this product follow these standard color codes: Although the rear panel may look daunting, connecting the unit to
Страница 18 из 55
RSX-1560 Surround Sound Receiver 18 This Rotel receiver provides upscaling and downscaling for the various video formats. Composite Video or S-Video video signals can be upscaled to 480p/576p, 720p, 1080i and 1080p on HDTV Component or HDMI monitors by choosing the appropriate output setting in the
Страница 19 из 55
English 19 Three sets of inputs, labeled COMPONENT VIDEO IN 1–3, accept Component video signals from source components. • Use the scaler setting of the receiver’s ‘VIDEO OUT FORMAT’ in the VIDEO/HDMI menu to match the native resolution of the TV monitor. High Deﬁnition TV Monitor Outputs vn
Страница 20 из 55
RSX-1560 Surround Sound Receiver 20 Note: When using digital connections, you may also want to make the analog audio input connections described previously. The analog connection is necessary to record to an analog recorder in some circumstances or for ZONE 2–4 operation. Digital Outputs [ The
Страница 21 из 55
English Note: Memorized settings and video labels are preserved indeﬁnitely, even if the unit is disconnected from AC power. Master Power Switch g The large rocker switch on the rear panel is a master power switch. When it is in the OFF position, power to the unit is completely off. When it is in
Страница 22 из 55
RSX-1560 Surround Sound Receiver 22 MAKING CONNECTIONS Make sure that you connect the right channel to the R input jack and the left channel to the L input jack. CD Player o� Cable, Satellite, or HDTV Tuner iolcb Connect the digital output of the CD player to any of the Optical or Coax digital
Страница 23 из 55
English connect one of the OPTICAL OUT or COAXIAL OUT connections to the digital input of the recorder. No video connections are required for an audio recording device. Video Recorder psl; 23 HDMI 1–4 inputs on the receiver. This cable sends the video signal from the player along with a digital
Страница 24 из 55
RSX-1560 Surround Sound Receiver 24 cables. If the standard deﬁnition TV does not have S-Video connectors, use a Composite Video connection. 3. Connect the center channel speaker to binding posts labeled “CENTER.” S-Video Analog connection: Connect an S-Video cable to the SVIDEO MON OUT output on
Страница 25 из 55
English Ampliﬁers f To hook up optional power ampliﬁers, connect an audio cable from each PREOUT jack to the input of the ampliﬁer channel that will power the corresponding speaker. In a full home theater system, you will need to make as many as seven different connections in addition to the
Страница 26 из 55
RSX-1560 Surround Sound Receiver 26 OPERATING THE RSX-1560 Considering its large number of features, settings, and options, this Rotel receiver is remarkably easy to operate. The key to operating the unit is its system of On-Screen Displays (OSD) which guide you through various choices. The
Страница 27 из 55
English VOLUME Knob = VOLUME Button Q The large rocker button on the remote and the large rotary control on the front panel provide the master VOLUME control, adjusting the output level of all channels simultaneously. MUTE Buttons eR Push the MUTE button once to turn the sound off. An indication
Страница 28 из 55
RSX-1560 Surround Sound Receiver 28 MENU/OSD Button S Push this button on the remote to turn on the OSD menu system. If the menu system is already visible, push this button to cancel the display. Press and hold the button to turn off the front-panel display. PIP Button POP Button ENTER Button T
Страница 29 из 55
English Front Panel: Rotate the front-panel VOLUME knob clockwise to increase the volume, counterclockwise to decrease. Remote: Press the VOL UP button to increase the volume; press the VOL DOWN button to decrease. When you adjust the volume, the setting is shown on the SDTV monitor and/or the
Страница 30 из 55
RSX-1560 Surround Sound Receiver 30 Party Mode: Selecting the Same Input for all Outputs rtJU You may wish to have the same input for listening, recording, and all of the remote zones. The receiver makes this conﬁguration (called Party Mode) easy by linking the inputs for recording and remote zones
Страница 31 из 55
English DTS 5.1 DTS 96/24 DTS® (Digital Theater Systems) is an alternative digital format competing with Dolby Digital in both movie theaters and home theater markets. The basic functions of the DTS system are similar to those of Dolby Digital (for example, 5.1 discrete channels), however the
Страница 32 из 55
32 DTS-HD Master Audio and DTS-HD High Resolution Audio Like Dolby’s TrueHD, DTS-HD Master Audio is an advanced lossless audio codec which is an optional sound format for Blu-ray discs, again delivering the original recorded sound ‘bit-for-bit’. It is also an optional format for HD-DVD disc
Страница 33 из 55
English default surround mode for each input using the INPUT SETUP menu (see the Setup section of this manual). Combined with the auto-detection of Dolby Digital 5.1 and DTS, this default surround setting makes operation of the receiver surround modes totally automatic. For example, if you set
Страница 34 из 55
34 EX decoding and may be the better 7.1 channel options for nonSurround EX discs. Selecting DD 5.1 forces the center back channel processing off for conventional 5.1 channel playback. You can also repeatedly press the DOLBY PLIIx Mode button on the front panel until the desired center back channel
Страница 35 из 55
English • To select DSP multichannel modes for 2-channel digital recordings. You can also step through the DSP options (MUSIC 1-4, 5CH, 7CH) by repeatedly pressing the DSP button on the front panel. Directly select 5CH mode by pressing the 5CH button on the remote. Directly select 7CH mode by
Страница 36 из 55
RSX-1560 Surround Sound Receiver 36 Dynamic Range L Cinema EQ K Dolby Digital recordings are capable of wide dynamic range (the difference between the softest and loudest sounds). In some cases, this may tax ampliﬁers and/or speakers. In other cases, you may want to reduce the dynamic range when
Страница 37 из 55
English BAND Buttons -I Press the BAND button to toggle between AM and FM reception. An indicator in the front-panel display conﬁrms your choice and the currently tuned station frequency is shown. TUNING Buttons =P The TUNING buttons (labeled CH UP/DOWN on the remote control) provide three
Страница 38 из 55
RSX-1560 Surround Sound Receiver 38 TUNE Button F PRESET Button G P-TUN Button Z These remote control buttons are used to change between FREQUENCY tuning mode and PRESET tuning mode. In frequency tuning mode, the TUNING buttons (CH UP/DOWN on the remote ) advance to the next station frequency. In
Страница 39 из 55
English Note: If the currently tuned station is broadcasting PTY data, a PTY indicator lights in the front-panel display. TP Button Searches for an RDS station broadcasting trafﬁc information programming: 1. Press the TP button. The tuner attempts to ﬁnd an RDS station broadcasting the trafﬁc
Страница 40 из 55
RSX-1560 Surround Sound Receiver 40 To change Zone 2, 3 or 4 volume: 1. Press the front panel SEL or remote REC button repeatedly until the desired zone status appears in the OSD and front panel displays. 2. Within 10 seconds, adjust the volume control on the front panel or remote to change the
Страница 41 из 55
English System Status �� 41 Main Menu ��
Страница 42 из 55
42 RSX-1560 Surround Sound Receiver 2. Press the ENT button on the remote to conﬁrm that letter and move to the next position. Note: Default surround modes are stored independently for the analog and digital inputs for each source. 3. Repeat steps 1 and 2 until all eight characters (including blank
Страница 43 из 55
English Multi Input Setup �� When the MULTI INPUT source is selected on the INPUT SETUP menu, the available options
Страница 44 из 55
44 In DTS Neo:6 mode, there will only be one choice available on the submenu: selecting CINEMA or MUSIC modes. Use the +/– buttons on the remote to change the settings. • Select CINEMA to optimize the DTS Neo:6 decoding for movie soundtracks. • Select MUSIC to optimize the DTS Neo:6 decoding for
Страница 45 из 55
English Speaker Setup �� The SPEAKER SETUP menu is used to conﬁgure the receiver for use with your speciﬁc loudspeakers
Страница 46 из 55
46 Note: When a speaker is set to LARGE on the SPEAKER SETUP menu or on this menu, the crossover setting is not available since, by deﬁnition, a LARGE speaker plays full-range with no bass redirection to the subwoofer and no crossover. Likewise, the OFF setting for the subwoofer crossover is not
Страница 47 из 55
English Test Tone �� This menu uses ﬁltered pink noise test tones to set equal volume levels
Страница 48 из 55
RSX-1560 Surround Sound Receiver 48 meters) in 1 foot (0.3m) increments with each increment equivalent to an additional delay of 1ms. To change a setting, place the highlight on the desired line using the UP/DOWN buttons and use the +/– buttons to increase or decrease the delay. To return to the
Страница 49 из 55
English from affecting any other zone in any way, even when the receiver is in zone mode following a change to a zone. The discrete option does not affect the control of the zones from the front panel buttons in any way. Note: The DISCRETE function is not available on all models and is dependent on
Страница 50 из 55
50 outputs may be assigned to each Zone and can send a turn-on signal to remote components whenever the Zones are activated. For example, Zone 2 could use 12V Triggers 1, 3 and 6; Zone 3, 12V Triggers 2 and 3; Zone 4, 12V Triggers 5 and 6. 1. Press the +/– buttons on the remote to change the ﬁrst
Страница 51 из 55
English 51 2. Enter the four digits of the old password by pressing the +/– buttons to select the ﬁrst letter of the new password, then pressing ENTER to move to the second character. Repeat until the old password is entered. Successful entry of the old password will jump to the ENTER NEW PASSWORD
Страница 52 из 55
52 • Check that the proper video source is selected for each input. RSX-1560 Surround Sound Receiver Clicking or popping sounds when switching inputs. Also with Blu-ray, but depending on the monitor being used to view the picture, you may also be able to enjoy new video enhancements such as Deep
Страница 53 из 55
English 53 Speciﬁcations Audio FM Tuner Continuous Ampliﬁer Power (seven channels driven) Usable Sensitivity 100 watts/ch (20-20k Hz, <0.05% THD, 8 ohms) Continuous Ampliﬁer Power 200 watts (1kHz, <1.0% THD, 4 ohms, DIN) Total Harmonic Distortion <0.05% Intermodulation Distortion (60Hz:7kHz) <0.05%
Страница 54 из 55
The Rotel Co. Ltd. 10-10 Shinsen-Cho Shibuya-Ku Tokyo 150-0045 Japan Rotel of America 54 Concord Street North Reading, MA 01864-2699 USA Phone: +1 978-664-3820 Fax: +1 978-664-4109 Rotel Europe Dale Road Worthing, West Sussex BN11 2BH England Phone: + 44 (0)1903 221 761 Fax: +44 (0)1903 221 525
Страница 55 из 55

Инструкция для ROTEL RSX-1560

Инструкции и руководства похожие на ROTEL RSX-1560

Другие инструкции и руководства из категории Магнитофон / музыкальный центр