Chapter 39 Access Control
ES3500 Series User’s Guide
297
errdisable
errdisableDetectTrap
ES3500-24:
1.3.6.1.4.1.890.1.5.8.61.130.4.1
ES3500-8PD:
1.3.6.1.4.1.890.1.5.8.72.130.4.1
ES3500-24HP:
1.3.6.1.4.1.890.1.5.8.73.130.4.1
This trap is sent when an error is
detected on a port, such as a loop
occurs or the rate limit for specific
control packets is exceeded.
errdisableRecoveryTrap
ES3500-24:
1.3.6.1.4.1.890.1.5.8.61.130.4.2
ES3500-8PD:
1.3.6.1.4.1.890.1.5.8.72.130.4.2
ES3500-24HP:
1.3.6.1.4.1.890.1.5.8.73.130.4.2
This trap is sent when the Switch
ceases the action taken on a port, such
as shutting down the port or discarding
packets on the port, after the specified
recovery interval.
Table 127
SNMP System Traps (continued)
OPTION
OBJECT LABEL
OBJECT ID
DESCRIPTION
Table 128
SNMP Interface Traps
OPTION
OBJECT LABEL
OBJECT ID
DESCRIPTION
linkup
linkUp
1.3.6.1.6.3.1.1.5.4
This trap is sent when the Ethernet
link is up.
LinkDownEventClear
ES3500-24:
1.3.6.1.4.1.890.1.5.8.61.27.2.2
ES3500-8PD:
1.3.6.1.4.1.890.1.5.8.72.27.2.2
ES3500-24HP:
1.3.6.1.4.1.890.1.5.8.73.27.2.2
This trap is sent when the Ethernet
link is up.
linkdown
linkDown
1.3.6.1.6.3.1.1.5.3
This trap is sent when the Ethernet
link is down.
LinkDownEventOn
ES3500-24:
1.3.6.1.4.1.890.1.5.8.61.27.2.1
ES3500-8PD:
1.3.6.1.4.1.890.1.5.8.72.27.2.1
ES3500-24HP:
1.3.6.1.4.1.890.1.5.8.73.27.2.1
This trap is sent when the Ethernet
link is down.
lldp
LLDPRemoteTopologyChange 1.0.8802.1.1.2.0.0.1
This trap is sent when the LLDP (Link
Layer Discovery Protocol) remote
topology changes.