ES3500 Series User’s Guide
84
C
H A P T E R
8
Basic Setting
This chapter describes how to configure the System Info, General Setup, Switch Setup, IP
Setup and Port Setup screens.
8.1 Overview
The System Info screen displays general Switch information (such as firmware version number)
and hardware polling information (such as temperatures). The General Setup screen allows you to
configure general Switch identification information. The General Setup screen also allows you to
set the system time manually or get the current time and date from an external server when you
turn on your Switch. The real time is then displayed in the Switch logs. The Switch Setup screen
allows you to set up and configure global Switch features. The IP Setup screen allows you to
configure a Switch IP address in each routing domain, subnet mask(s) and DNS (domain name
server) for management purposes. The Port Setup screen allows you to enable or disable a port on
the Switch and configure the port settings, such as the speed and duplex mode.
8.2 System Information
In the navigation panel, click Basic Setting > System Info to display the screen as shown. You
can check the firmware version number and monitor the Switch temperature and voltage in this
screen.
Figure 30
Basic Setting > System Info