Chapter 5 Initial Setup Example
ES3500 Series User’s Guide
48
1
Click Advanced Application > VLAN in the navigation panel and click the Static VLAN link.
2
In the Static VLAN screen, select ACTIVE, enter a descriptive name in the Name field and enter
2 in the VLAN Group ID field for the VLAN2 network.
Note: The VLAN Group ID field in this screen and the VID field in the IP Setup screen
refer to the same VLAN ID.
3
Since the VLAN2 network is connected to port 1 on the Switch, select Fixed to configure port 1 to
be a permanent member of the VLAN only.
4
To ensure that VLAN-unaware devices (such as computers and hubs) can receive frames properly,
clear the TX Tagging check box to set the Switch to remove VLAN tags before sending.