Chapter 6 Tutorials
ES3500 Series User’s Guide
68
2
Go to Basic Setting > Switch Setup and set the VLAN type to 802.1Q. Click Apply to save the
settings to the run-time memory.
3
Click Advanced Application > VLAN > Static VLAN.
4
In the Static VLAN screen, select ACTIVE, enter a descriptive name (VLAN 200 for example) in
the Name field and enter 200 in the VLAN Group ID field.
5
Select Fixed to configure ports 1, 2, 3 and 10 to be permanent members of this VLAN.
6
Clear the TX Tagging check box to set the Switch to remove VLAN tags before sending frames out
of these ports.