Chapter 42 Cluster Management
ES3500 Series User’s Guide
325
42.3 Clustering Management Configuration
Use this screen to configure clustering management. Click Management > Cluster Management
> Configuration to display the next screen.
Figure 203
Management > Cluster Management > Configuration
The following table describes the labels in this screen.
Table 145
Management > Cluster Management > Configuration
LABEL
DESCRIPTION
Clustering Manager
Active
Select Active to have this Switch become the cluster manager switch. A cluster can
only have one manager. Other (directly connected) switches that are set to be cluster
managers will not be visible in the Clustering Candidates list. If a switch that was
previously a cluster member is later set to become a cluster manager, then its Status is
displayed as Error in the Cluster Management Status screen and a warning icon
(
) appears in the member summary list below.
Name
Type a name to identify the Clustering Manager. You may use up to 32 printable
characters (spaces are allowed).