Chapter 6 Tutorials
ES3500 Series User’s Guide
73
do port isolation in a VLAN instead of assigning each port to a separate VLAN and creating a
different IP routing domain for each individual port.
In this example, you put ports 2 to 4 and 25 in VLAN 123 and create a private VLAN rule for VLAN
123 to block traffic between ports 2, 3 and 4.
6.6.1 Creating a VLAN
Follow the steps below to configure port 2, 3, 4 and 25 as a member of VLAN 123.
1
Access the web configurator through the Switch’s port which is not in VLAN 123.
2
Go to Basic Setting > Switch Setup and set the VLAN type to 802.1Q. Click Apply to save the
settings to the run-time memory.
3
Click Advanced Application > VLAN > Static VLAN.
4
In the Static VLAN screen, select ACTIVE, enter a descriptive name (VLAN 123 for example) in
the Name field and enter 123 in the VLAN Group ID field.
Internet