Инструкция для ZYXEL P-870HW-51A V2

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Chapter 7 Wireless LAN

P-870H/HW Series User’s Guide

101

The following table describes the labels in this screen.

7.8 The WDS Screen

A Wireless Distribution System (WDS) is a wireless connection between two or
more APs. Use this screen to set up your WDS links between the ZyXEL Devices.
You need to know the MAC address of the peer device. Once the security settings
of peer sides match one another, the connection between the devices is made.

Note: You can use WDS only when wireless security is set to “No Security” or “WEP”.

The wireless security settings apply to both WDS links and the connections
between the ZyXEL Device and any wireless clients.

Note: At the time of writing, WDS is only compatible with other ZyXEL Devices of the

same model.

Table 30

Network > Wireless LAN > WPS Station

LABEL

DESCRIPTION

Push Button

Click this button to add another WPS-enabled wireless device (within
wireless range of the ZyXEL Device) to your wireless network. This
button may either be a physical button on the outside of device, or a
menu button similar to the Push Button on this screen.

Note: You must press the other wireless device’s WPS button within

two minutes of pressing this button.

Or input
station's PIN
number

Enter the PIN of the device that you are setting up a WPS connection
with and click Start to authenticate and add the wireless device to your
wireless network.

You can find the PIN either on the outside of the device, or by checking
the device’s settings.

Note: You must also activate WPS on that device within two minutes

to have it present its PIN to the ZyXEL Device.