![background image](/i/zyxel/151872/zyxel-p-870hw-51a-v2/h/zyxel-p-870hw-51a-v2-220.png)
Chapter 22 Logs
P-870H/HW Series User’s Guide
221
To change your ZyXEL Device’s log settings, click Maintenance > Logs > Log
Settings. The screen appears as shown.
Figure 130
Maintenance > Logs > Log Settings
The following table describes the fields in this screen.
Table 86
Maintenance > Logs > Log Settings
LABEL
DESCRIPTION
Active
Select to enable or disable system logging.
Log Level
Select the severity level of the logs that you want the ZyXEL Device to
display, record and send to the log server.
The ZyXEL Device displays and records the logs with the severity level
equal to or higher than what you selected.
Mode
Select Local to record the logs and store them in the local memory of the
ZyXEL Device only.
Select Remote to send logs to the specified log server.
Select Both to record the logs and store them in the local memory and
also send logs to the log server.
Syslog Server
IP Address
Enter the server name or the IP address of the log server.
Syslog Server
UDP Port
Enter the UDP port of the log server.
Apply
Click Apply to save your customized settings.