Chapter 13 Policy Forwarding
P-870H/HW Series User’s Guide
162
The following table describes the labels in this screen.
13.2.1 Policy Forwarding Setup
Click the Add button in the Policy Forwarding screen. Use this screen to
configure the required information for a policy route.
Figure 90
Policy Forwarding: Add
The following table describes the labels in this screen.
Table 59
Advanced > Policy Forwarding
LABEL
DESCRIPTION
Policy Name
This is the name of the rule.
SourceIP
This is the source IP address.
Protocol
This is the IP protocol.
SourcePort
This is the source port number.
SourceMAC
This is the source MAC address.
Interface
This is the WAN interface through which the traffic is routed.
Remove
Click the icon to remove a rule from the ZyXEL Device. A window displays
asking you to confirm that you want to delete the rule.
Add
Click this to create a new rule.
Table 60
Policy Forwarding: Add
LABEL
DESCRIPTION
Policy Name
Enter a descriptive name of up to 16 printable English keyboard
characters, including spaces.
Source IP
Address
Enter the source IP address.
Protocol
Select the IP protocol (TCP or UDP).
Source Port
Enter the source port number.
Use Interface
Select a WAN interface through which the traffic is sent. You must have
the WAN interface(s) already configured in the WAN screens.
Back
Click Back to return to the previous screen without saving.