![background image](/i/zyxel/151872/zyxel-p-870hw-51a-v2/h/zyxel-p-870hw-51a-v2-061.png)
Chapter 5 WAN Setup
P-870H/HW Series User’s Guide
61
The following table describes the labels in this screen.
5.5.1.2 Service Type
Figure 32
WAN Configuration: Service Type
The following table describes the labels in this screen.
Table 12
WAN Configuration: WAN Interface
LABEL
DESCRIPTION
Select a layer 2
interface for this
service
Select ptm0 to use the DSL port as the WAN port for this connection.
Back
Click this button to return to the previous screen.
Next
Click this button to continue.
Table 13
WAN Configuration: Service Type
LABEL
DESCRIPTION
Select WAN
service type
Select the method of encapsulation used by your ISP.
Choices are PPP over Ethernet (PPPoE), IP over Ethernet and
Bridging.
Enter Service
Description
Specify a name for this connection or use the automatically generated
one.
Rate Limit
Enter the maximum transmission rate in Kbps for traffic sent through the
WAN connection. Otherwise, leave this field blank to disable the rate
limit.
Tag VLAN ID
for egress
packets
Select this option to add the VLAN tag (specified below) to the outgoing
traffic through this connection.
This field is available when the PTM interface is in VLANMUX mode.