![background image](/i/zyxel/151872/zyxel-p-870hw-51a-v2/h/zyxel-p-870hw-51a-v2-183.png)
Chapter 17 Remote Management
P-870H/HW Series User’s Guide
184
Click Advanced > Remote MGMT to open the following screen. Use this screen
to configure your P-870HA to be managed by an ACS.
Figure 99
TR-069
The following table describes the fields in this screen.
Table 70
TR-069
LABEL
DESCRIPTION
Inform
Select Enable to activate remote management via TR-069 on the
WAN. Otherwise, select Disable.
Inform Interval
Enter the time interval (in seconds) at which the ZyXEL Device sends
information to the auto-configuration server.
ACS URL
Enter the URL or IP address of the auto-configuration server.
ACS User Name
Enter the TR-069 user name for authentication with the auto-
configuration server.
ACS Password
Enter the TR-069 password for authentication with the auto-
configuration server.
WAN Interface
used by TR-069
client
Select a WAN interface through which the TR-069 traffic passes.
Display SOAP
messages on
serial console
Select Enable to show the SOAP messages on the console.
Connection
Request
Authentication
Select this option to enable authentication when there is a connection
request from the ACS.
Connection
Request User
Name
Enter the connection request user name.
When the ACS makes a connection request to the ZyXEL Device, this
user name is used to authenticate the ACS.