![background image](/i/zyxel/151872/zyxel-p-870hw-51a-v2/h/zyxel-p-870hw-51a-v2-090.png)
Chapter 7 Wireless LAN
P-870H/HW Series User’s Guide
90
7.4.1 No Security
Select No Security to allow wireless devices to communicate with the access
points without any data encryption or authentication.
Note: If you do not enable any wireless security on your ZyXEL Device, your network
is accessible to any wireless networking device that is within range.
Figure 45
Wireless LAN > General: No Security
Hide Network
Name (SSID)
Select this check box to hide the SSID in the outgoing beacon frame so a
station cannot obtain the SSID through scanning using a site survey tool.
Disable WMM
Advertise
WMM (Wi-Fi MultiMedia) QoS (Quality of Service) allows you to prioritize
wireless traffic according to the delivery requirements of individual
services. To do this, you must enable WMM QoS on all wireless devices in
your network.
Select this option to not broadcast the WMM information in beacon frames
and disable WMM QoS on the ZyXEL Device.
BSSID
This shows the MAC address of the wireless interface on the ZyXEL Device
when wireless LAN is enabled.
Security
Mode
See the following sections for more details about this field.
MAC Filter
Click this button to go to the MAC Filter screen to configure whether the
wireless devices with the MAC addresses listed are allowed or denied to
access the ZyXEL Device using this SSID.
Apply
Click this to save your changes back to the ZyXEL Device.
Reset
Click this to reload the previous configuration for this screen.
Table 21
Network > Wireless LAN > General
LABEL
DESCRIPTION