![background image](/i/zyxel/151872/zyxel-p-870hw-51a-v2/h/zyxel-p-870hw-51a-v2-065.png)
Chapter 5 WAN Setup
P-870H/HW Series User’s Guide
65
IPoE
This screen displays when you select IP over Ethernet in the WAN Service
Configuration screen.
Figure 34
WAN Configuration: IPoE
The following table describes the labels in this screen.
Table 15
WAN Configuration: IPoE
LABEL
DESCRIPTION
Obtain an IP
address
automatically
A static IP address is a fixed IP that your ISP gives you. A dynamic IP
address is not fixed; the ISP assigns you a different one each time you
connect to the Internet. Select this if you have a dynamic IP address.
Enable DHCP
Option 60
Select this to identify the vendor and functionality of the ZyXEL Device
in DHCP requests that the ZyXEL Device sends to a DHCP server when
getting a WAN IP address.
Vendor Class
Identifier
Enter the Vendor Class Identifier (Option 60), such as the type of the
hardware or firmware.
Enable DHCP
Option 61
Select this to identify the ZyXEL Device in DHCP requests that the
ZyXEL Device sends to a DHCP server when getting a WAN IP address.
IAID
Enter the Identity Association Identifier (IAID) of the ZyXEL Device.
For example, the WAN connection index number.