![background image](/i/zyxel/151872/zyxel-p-870hw-51a-v2/h/zyxel-p-870hw-51a-v2-233.png)
Chapter 24 Diagnostic
P-870H/HW Series User’s Guide
234
Maintenance
Association (MA)
Format
Select the format which the ZyXEL Device uses to send this MA
information in the domain (MD). Options are VID, String and
Integer.
If you select VID or Integer, the ZyXEL Device adds the VLAN ID you
specified for an MA in the CCM.
If you select String, the ZyXEL Device adds the MA name you
specified above in the CCM.
Note: The MEPs in the same MA should use the same MA format.
Destination MAC
Address
Enter the target device’s MAC address to which the ZyXEL Device
performs a CFM loopback test.
Count
Set how many times the ZyXEL Device send loopback messages
(LBMs).
802.1Q VLAN ID
Type a VLAN ID (0-4095) for this MA.
Maintenance End
Point ID
Enter an ID number (1-8191) for this MEP port. Each MEP port needs a
unique ID number within an MD. The MEP ID is to identify an MEP port
used when you perform a CFM action
Status
Continuity Check
Message (CCM)
This shows how many Connectivity Check Messages (CCMs) are sent
and if there is any invalid CCM or cross-connect CCM.
Loopback
Message (LBM)
This shows how many Loop Back Messages (LBMs) are sent and if
there is any inorder or outorder Loop Back Response (LBR) received
from a remote MEP.
Linktrace
Message (LTM)
This shows the destination MAC address in the Link Trace Response
(LTR).
Save
Click this to save your changes back to the ZyXEL Device.
Enable CCM
Click this button to have the selected MEP send Connectivity Check
Messages (CCMs) to other MEPs.
Disable CCM
Click this button to disallow the selected MEP to send Connectivity
Check Messages (CCMs) to other MEPs.
Update CC status Click this button to reload the test result.
Send Loopback
Click this button to have the selected MEP send the LBM (Loop Back
Message) to a specified remote end point.
Send Linktrace
Click this button to have the selected MEP send the LTMs (Link Trace
Messages) to a specified remote end point.
Table 90
Maintenance > Diagnostic > 802.1ag (continued)
LABEL
DESCRIPTION