29
29
8 .1
Installing the PC Software
8 .1
Installing the PC Software
If your video fi le is not an MPEG-4 Simple Profi le .avi fi le of the proper size, you will need to re-encode it using
the following utilities. For the AV 700 TV, you will need to create an AVI fi le that is MPEG-4 Simple Profi le with a
resolution up to 720 x 576 (depending on frame rate) and a sound track that is stereo MP3 or WAV. In actuality,
in all cases, a resolution beyond 640x480 does not add any advantage.
MPEG-4 codec (Compression/Decompression)
In order for MPEG-4-Translator to compress the video in a fi le of the format MPEG-4 SP that the AV 700 TV can
read, it requires an MPEG-4 codec to be installed on your computer.If you do not have the approporiate codec
installed, MPEG-4 Translator will tell you on start up which codec it requires. You will be able to download it for
free from the Internet.
Virtual Dub
™
A utility for transcoding one video fi le into another. This is a general purpose transfer and cleanup utility which
has many options allowing for even the most diffi cult video translations. When you install it with the ARCHOS
™
Installation Utility, it will automatically unzip. It will prompt you to save it to C:\Program Files\VirtualDub. You
should use this default directory location. Otherwise you will have to instruct the MPEG-4 Translator program
where to fi nd it. For more information on Virtual Dub
™
see the website - http://www.virtualdub.org.
MPEG-4 Translator
This program, developed by Archos, is a “Front-end” for the Virtual Dub program. It has a simple interface which
you use and it then tells Virtual Dub how to process the video fi le. It sets all the parameters for Virtual Dub
specifi cally to create a video fi le in the right size and format to be read by the AV 700 TV. When you run it for the
fi rst time, the MPEG-4 Translator will need to locate the Virtual Dub program. If you did not install Virtual Dub in
the default location, you will have to show the program where Virtual Dub is. If you forget, Windows
®
will give you
an error when you try to launch it.
30
30
MP3 Sound Codec
If MPEG-4 Translator detects a suitable MP3 codec on your PC, it
will use it, and your video fi le sound track will be MP3. Otherwise, it
will use the standard IMA ADPCM codec. There are MP3 encoders
(usually packaged together as an encoder and decoder) available on
the Web for you to download. If you choose to use the
LAME
codec,
make sure that you have a version built with the ACM front-end. You
can fi nd other MP3 codecs on the web by using the search terms
ACM
,
MP3
and
CODEC
in your favorite web search engine. Once
this MP3 codec is installed into your system, MPEG-4 Translator will
be able to create fi nal video fi les with MP3 sound, even if the source
video fi le does not have an MP3 sound track.
If you are unsure what codecs (audio and/or video) have been installed
on your computer, you can see the list by going to the following
location.
For Windows XP, click on
Start > Settings > Control Panel > Sounds and Audio Devices Properties > Hardware
,
choose
Audio Codecs
, then click on
Properties
. You will fi nd a list here of all the audio codecs that are installed
on your computer. Decoding of MPEG 2 video fi les is currently not supported by MPEG-4 Translator. These
are usually .mpg or .mpeg format fi les, not the required AVI fi le. There are other tools found on the Internet
(FlaskMPEG, Rippack, etc.) that may be downloaded in order to help you with these fi le types. A good starting
place is the website www.digital-digest.com.