9
9
1.1
Remote Control Description
1.1
Remote Control Description
Numeric entry: to access a Digital TV
channel directly, enter its number.
Switch between Built-in & External Video
Increase / Decrease Volume
Mute sound
This group of buttons acts as the
navigation and acceleration buttons on
the left of the AV 700 TV and the Play &
Stop buttons on the right side.
Action icon select and execute buttons
Displays Action icon descriptions,
if activated (Setup > Display)
Standby / Wake Up
10
10
2
2
INTRO – First Time Usage
INTRO – First Time Usage
2.1
Plugging in the AC Adapter
2.1
Plugging in the AC Adapter
• Use only the included ARCHOS
™
charger/adapter.
• You can charge the internal battery of the AV 700 TV by plugging the included adapter/charger directly into the
device, or you can charge it by plugging the adapter/charger into the optional TV Docking Pod and connecting
your AV 700 TV to the optional TV Docking Pod.
• Before using for the fi rst time, charge the batteries completely. The charge indicator (CHG) light just below the
navigation pad will start to blink when the battery is charged.
2.2
Turning on the AV 700 TV
2.2
Turning on the AV 700 TV
•
Hold the PLAY/ON button for 3 seconds.
The green “On” indicator light will turn on. Be patient, it will take a
few seconds for the operating system to boot up.
• If the unit shuts off after holding the ON button for several seconds, plug in the ARCHOS
™
adapter/charger to
make sure the batteries get charged.
2.3
Shutting off the AV 700 TV and Battery saving features
2.3
Shutting off the AV 700 TV and Battery saving features
To shut off the unit, press and hold the STOP/ESC/OFF button for 3 seconds.
In the Power menu
[Display setup screen Power: Battery Operation]
there is a
Power Off
parameter. It is
factory set to 6 minutes. Thus, if your AV 700 TV is idle for 6 minutes, it will shut itself off. This setting can be
changed from one to nine minutes or to
never
.
In the Power menu
[Display setup screen Power: Battery Operation]
there is a
Backlight Off
parameter to save battery power (the lighting of the screen consumes
a lot of the battery power). It is factory set to 60 seconds. That is, if the AV 700 TV is
not being used, the screen will shut off in order to save battery life. To turn the screen
back on, just click once on any button. See the section
Power
in the
Settings
chapter
for a complete explanation.