93
93
23.7 Copy Protection
23.7 Copy
Protection
The AV 700 TV video recording system is designed to respect the Macrovision® copyright protection system. If
the source of your video is copy protected, the AV 700 TV will record in protected mode. You will see a ”P” icon
on the recording screen (not during playback) indicating that the fi le will be a protected fi le. Protected fi les can
only be played back on the AV 700 TV that created it. The fi le will not play on a computer. Further, the playback
of protected fi les will be limited to the built-in LCD screen and not to an external television.
23.8 Docking Pod-Specifi c Options
23.8 Docking
Pod-Specifi c Options
23.8.1 Manually Setting the Scheduler
If you would like to make a video recording for a future date or time, you can use the scheduler. You
can fi nd it in the main menu. You can program up to twenty different recordings up to one month in
advance. Once you program your dates and times of recording, press the action button OK to set them.
You must now put your AV 700 TV into standby mode by pressing on the red Standby/wake-up button
on your ARCHOS™ remote control or just leave it alone. If left alone, the AV 700 TV will go on standby
itself after a few minutes.
1. Click the Scheduler icon.
2. Select the line you want to edit using the UP and DOWN buttons, then click RIGHT to start editing.
3. Set each line to the desired date, time (and channel if you are using the Infrared emitter to control your VCR,
cable box, or satellite receiver). If setting a specifi c channel on your external appliance, make sure that the
letter before the channel number is A (A stands for Analog recording and D stands for Digital TV - see section
4.2 about using the scheduler for Digital TV recordings).
4. Click on the bottom action icon Edit program title and give a name of your choosing. Click on the save icon to
save the program. Click on the STOP/ESC button to return to the previous screen.
5. DO NOT shut off the AV 700 TV! Set the AV 700 TV to Standby (red ‘standby’ button on remote control) or go
back to the main menu screen and allow it to automatically (after a couple minutes of inactivity) go into standby
mode.
94
94
Empty Scheduler, ready to be programmed. Once a valid record
time is entered, and the save button pressed, the empty box will get
a green checkmark.
Scheduler after having been set. The “--- Current” means that
the AV 700 TV will record the current video signal (no channel
changing). This is for people who do not use the stick-on infrared
emitter.
Notes about setting the Scheduler:
• The scheduler automatically reorganizes the recording events chronologically.
• In order for a scheduled recording to start, you must leave the AV 700 TV in the main menu screen or set it to
standby mode (press Standby button on remote control). That is, if you are listening to music, watching a video,
or looking at photos on your AV 700 TV, it will not interrupt you in order to go make the scheduled recording.
• If you have connected and will be using the IR Emitter system (see the TV Docking Pod chapter as well as the
chapter Setting the Infrared Emitter code below) with a video cassette recorder (VCR) please note that in order
for the IR Emitter to properly control the VCR, your VCR should not be left in sleep mode.
• When the AV 700 TV user interface is in English, the Date format is set to Month/Day.