![background image](/i/dell/157615/dell-3100cn/h/dell-3100cn-181.png)
*1 The following are illegal characters: semicolon (;), colon (:), asterisk (*), question mark (?), period (.), comma (,), yen mark (
¥
), back slash (\), double
quotation ("), comparison symbols (< >), brackets ([ ]), operation symbols (+, =, or ~), pipe (|), slash (/), and space ( ).
SMB
Purpose:
To configure detailed settings for SMB.
Values:
Network Address
Displays the IPX network address.
NetWare Device Name
*
1
Specifies the printer name up to 47 alphanumeric characters.
For PServer Mode, set the Print Server Name (Print Server Object Name). For RPrinter Mode, set the Remote Printer
Name (Printer Name in Bindery and Printer Object Name in Directory). The original setting remains valid if no input
is made.
Active
Mode
Bindery:
PServer Mode
Selects this option when using
Directory: PServer Mode
in
Bindery: PServer Mode
.
Bindery:
RPrinter Mode
Selects this option when using
Directory: RPrinter Mode
in
Bindery: PServer Mode
.
Directory:
PServer Mode
Selects this option when using
Directory: PServer Mode
in
Bindery: RPrinter Mode
.
Directory:
RPrinter Mode
Selects this option when using
Directory: RPrinter Mode
in
Bindery: RPrinter Mode
.
Tree Name
*
1
Specifies the tree name up to 32 alphanumeric characters. Configure this item only when
Directory: PServer
Mode
or
Directory: RPrinter Mode
is selected.
Context Name
Specifies the context name of the Print Server Object up to 255 alphanumeric characters. Configure this item only
when
Directory: PServer Mode
or
Directory: RPrinter Mode
is selected.
File Server Name
*
1
Specifies the file server name up to 47 alphanumeric characters. Configure this item only when
Bindery: PServer
Mode
or
Bindery: RPrinter Mode
is selected.
Print Server Name
*
1
Specifies the print server name up to 47 alphanumeric characters. Configure this item only when
Bindery: RPrinter
Mode
or
Directory: RPrinter Mode
is selected.
Polling Interval
Sets the time interval from when print data enters the print queue until printing starts. The setting range is from 1
to 1000 seconds. The original setting remains valid if no input is made. Configure this item only when
Bindery:
PServer Mode
or
Directory: PServer Mode
is selected.
Receive Time-Out
Sets the timeout period that confirms data has been received. The setting range is from 1 to 1000 seconds.
NCP
Packet
Burst
On
Uses NCP packet burst.
Off
Does not use NCP packet burst.
Password
Sets the print server password up to 32 alphanumeric characters. Configure this item only when
Bindery: PServer
Mode
or
Directory: PServer Mode
is selected.
Confirm Password
Allows you to confirm the configured password by re-entering the same password.
Status Information
Displays the messages according to the conditions of the printer.
Logical Printer Number
Displays the printer number during
Bindery: RPrinter Mode
or
Directory: RPrinter Mode
.
NOTE:
The settings in the
NetWare
page will be valid only when NetWare or the printer is rebooted. Click the
Restart printer to apply new settings.
button to apply new settings.
NOTE:
An optional multi protocol card is required to display the
NetWare
page.
Host Name
Specifies the host name up to 15 alphanumeric characters. The original setting will remain valid if no input is made.
Workgroup
Specifies the workgroup name up to 15 alphanumeric characters. The original setting will remain valid if no input is made.
Administrator Name
Specifies the administrator name up to 20 alphanumeric characters. The original setting will remain valid if no input is made.
The default name is
admin
.
Administrator Password
Specifies the administrator password up to 14 alphanumeric characters. The original setting will remain valid if no input is
made. The default password is
password
.
Confirm Administrator
Password
Allows you to confirm the configured administrator password by re-entering the same password.
Maximum Sessions
Displays the maximum sessions.
Unicode Support
On
Notifies the host name and workgroup name in Unicode characters.
Off
Does not notify the host name and workgroup name in Unicode characters.