![background image](/i/dell/157615/dell-3100cn/h/dell-3100cn-021.png)
You can set up your driver to use duplexing on all print jobs. If you do not want duplexing for a specific print job, you can override this feature.
1.
In Windows Server 2003 and Windows XP, click
Start
®
Printers and Faxes
.
In all other operating systems, click
Start
®
Settings
®
Printers
.
2.
Right-click this printer icon.
3.
In Windows Server 2003, Windows XP and Windows 2000, click
Printing Preferences
.
In Windows NT 4.0, click
Document Defaults
.
In Windows Me and Windows 95/98, click
Properties
.
4.
Click
Paper
(or
Layout
) tab.
5.
In the
Duplex
combo box, select either
Flip on Long Edge
or
Flip on Short Edge
, and then click
Apply
.
6.
Click
OK
, and then close the
Printers and Faxes
(or
Printers
) folder.
Installing Cards
Installing a Memory Card
Your printer supports 64, 128, 256, and 512 MB additional memory cards.
1.
Make sure that the printer is turned off.
2.
Remove the control board cover on the left side of the printer by pulling the notch.
3.
Hold the memory card so the notch is aligned with the projection on the slot.
4.
Push the memory card into the slot firmly.
NOTE:
The 64 MB memory card comes with the optional duplex module. Before you use the optional duplex module, you need to install the 64 MB
memory card on the printer. If you already have an existing memory card installed on the printer, you do not have to use the 64 MB memory card
provided with your duplex module.