![background image](/i/dell/157615/dell-3100cn/h/dell-3100cn-202.png)
4.
Before loading the print media, flex the sheets back and forth, and then fan them. Straighten the edges of the stack on a level surface.
5.
Place the print media into the tray with the recommended print side face up.
6.
Slide the width guides and length guide until they rest lightly against the edge of the print media stack.
7.
Insert the tray.
8.
If you load any print media into the tray, configure the
Paper Type
and
Paper Size
settings for that tray according to the message.
Loading Letterhead
Place the printed side face up.
NOTE:
Do not exceed the maximum fill line in the tray. Overfilling the tray may cause paper jams.
Print media source
Print side
Page orientation
Standard 250-sheet tray module
Optional 250-sheet tray module or 500-sheet tray module
Face up
Back of tray
Multipurpose feeder
Face up
Logo enters the printer first