![background image](/i/dell/157615/dell-3100cn/h/dell-3100cn-076.png)
11.
Now press
MENU
to get back to
Tray Settings/Paper Size
.
12.
Press
to get to
Paper Type
.
13.
Press
to select
Paper Type
.
14.
Press
to get to
MPF
.
15.
Press
to select
MPF
.
16.
Using
and
, select the appropriate paper type (Plain 1).
17.
Press
SELECT
, once Plain 1 is displayed on the lower line.
18.
Now we have the MPF Type set to Plain 1.
19.
Now press
MENU
to get back to
Ready to Print
20.
Now insert the Envelope-sized stack of paper into the MPF.
21.
On the screen
MPF/Envelope
will appear. (ONLY ON 3x00cn)
22.
Press
SELECT
to confirm this. (ONLY ON 3x00cn)
23.
Now on the screen
MPF/Plain 1
will appear.
24.
Press
SELECT
to confirm this.
25.
We now have all the hardware settings on the printer correct
Now, all software settings screen shots are from WORD, this was done in Word. However if in any application, you go
File
®
and then click the
Properties
button, you will get this same driver properties window.
26.
Open up Word and create a new document.
27.
Go to
File
®
.
28.
Select the
Dell Color Laser Printer
from the printers list
29.
Click the
Properties
button to the right.
30.
This brings up Driver Properties.
31.
Click on the
Paper Tray
Tab.
32.
Change the Paper Source to
MPF
.
33.
Click the
Paper
Tab.
34.
Select in
paper size
,
Transparency
.
35.
Select for
Output Size
,
Same as Paper Size
.
36.
Click
OK
.
37.
Click
Close
.
38.
Now the printer driver is setup correctly.
39.
Now go to
File
®
Page Setup
.
40.
Click the
Paper
Tab.
41.
Change Paper Size to Legal.
42.
Change the Paper source settings BOTH to "DEFAULT TRAY AS PER PRINTER".
43.
Click
OK
.
44.
Type in some gibberish in the body of the document and click Print!
Setup Paper Size
1.
Start Here
2.
On the printer press
MENU
.
3.
Press
to get to
Tray Settings
.
4.
Press
to select
Tray Settings
.
5.
Press
to get to
Paper Size
.
6.
Press
to select
Paper Size
.
7.
Press
to get to
MPF
.
8.
Press
to select
MPF
.
9.
Using
and
, select the appropriate paper size (Letter).
10.
Press the middle button,
SELECT
, once Letter is displayed on the lower line, this puts a * by it.