English-33

English

This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.

Functions that can be controlled by a personal computer are:

• 

Power ON or OFF.

• 

Switching between input signals.

• 

Sound Mute ON or OFF.

Connection

LCD Monitor + PC

RS-232C Cable

PC

RS-232C

MultiSync

NOTE:

If your PC is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is required. Contact your 
dealer for details.
For the pin assignment, please see page 54 “2) RS-232C input/output”.

To control a monitor, please use the control command. Instructions for the control command can be found on the CD included 
with the display. The fi le is called “External_control.pdf”.

1) Interface

PROTOCOL

RS-232C

BAUD RATE

9600 [bps]

DATA LENGTH

8 [bits]

PARITY BIT

NONE

STOP BIT

1 [bit]

FLOW CONTROL

NONE

This LCD monitor uses RXD, TXD and GND lines for RS-232C control.
The reverse type cable (null modem cable) (not include) should be used for RS-232C control.

Controlling the LCD monitor via RS-232C Remote Control