English-41

English

AMX Setting

Click “AMX” on the left side of HOME.

AMX BEACON

Turn on or off for detection from AMX Device Discovery when connecting to the network supported by 
AMX’s NetLinx control system.

TIP: 
When using a device that supports AMX Device Discovery, all AMX NetLinx control system will 
recognize the device and download the appropriate Device Discovery Module from an AMX server.
Checking [ENABLE] will detect the device from AMX Device Discovery.
Checking [DISABLE] will not detect the device from AMX Device Discovery.

CRESTRON Setting

Click “CRESTRON” on the left side of HOME.

CRESTRON ROOMVIEW compatibility
The monitor supports CRESTRON ROOMVIEW, allowing multiple devices connected in the network to be managed and 
controlled from a computer or a controller.
For more information, visit http://www.crestron.com

ROOMVIEW 

ROOMVIEW for managing from the computer.
ON: Enables ROOMVIEW. 
OFF: Disables ROOMVIEW.

CRESTRON 
CONTROL 

CRESTRON CONTROL for managing from the controller.
ON: Enables CRESTRON CONTROL. 
OFF: Disables CRESTRON CONTROL.

CONTROLLER IP 
ADDRESS 

Set your IP address of CRESTRON SERVER.

IP ID 

Set your IP ID of CRESTRON SERVER.

TIP:

  The CRESTRON settings are required only for use with CRESTRON ROOMVIEW.

For more information, visit 

http://www.crestron.com