English-38

Mail Setting

Click “MAIL” on the left side of HOME.

This option notifi es your computer of an error message via e-mail when using wired LAN. An error message notifi cation will be 
sent when an error occurs in the monitor.

ALERT MAIL

Checking [ENABLE] will turn on the Alert Mail feature.
Checking [DISABLE] will turn off the Alert Mail feature.

STATUS MESSAGE

Checking [ENABLE] will turn on the STATUS MESSAGE  feature.
Checking [DISABLE] will turn off the  STATUS MESSAGE  feature.

SENDER’S ADDRESS

Type in the senders address. Up to 60 alphanumeric and symbols characters can be used.

SMTP SERVER

Type in the SMTP server name to be connected to the monitor.
Up to 60 alphanumeric characters can be used.

RECIPIENT’S 
ADDRESS 1 TO 3

Type in your recipient’s address. Up to 60 alphanumeric and symbols characters can be used.

AUTHENTICATION 
METHOD

This selects the authentication method of the e-mail transmission. 

POP3 SERVER

This specifi es the address of the POP3 server that is used in the authentication of the e-mail. 

USER NAME

This sets the user name for logging into the authentication server when authentication is required 
for the e-mail transmission. Up to 60 alphanumeric characters can be used.

PASSWORD

This sets the password for logging into the authentication server when authentication is required for 
the e-mail transmission. Up to 60 alphanumeric characters can be used.

TEST MAIL

Click this button to send a test mail to check if your settings are correct.

NOTE: 

•  If you execute a test, you may not receive an Alert mail. 
  Should this happen, check if the network settings are correct.
•  If you entered an incorrect address in a test, you may not receive an Alert mail. 
  Should this happen, check if the Recipient’s Address is correct.

TIP: 

The Alert Mail settings will not be affected even when [RESET] is done from the menu.
For Control command diagram, please see fi le “External_Control.pdf” on the CD-ROM.