![background image](/i/olympus/171218/olympus-cell-frap/h/olympus-cell-frap-015.png)
Illumination Combiner, User Manual
Chapter 3 –
Safety Precautions and Handling
Instructions
9
3
Safety Precautions and Handling
Instructions
The Olympus
scanning FRAP system must be used with laser products belonging to the Laser
Safety Class 3B. Class 3B lasers are medium power lasers with an output power of up to 500 mW
within 400 – 700 nm wavelength. The total of the output power of the connected lasers may not exceed
500 mW. Viewing these lasers under direct beam and specular reflection conditions is hazardous. The
diffuse reflection is usually not a hazard except for higher power Class 3B and Class 4 lasers. Normally
the class 3B laser is not a fire hazard. A class 3B laser product may only be used under the control of a
laser safety officer. Before using this product be sure to be familiar with the demanded safety measures
according to EN 60825-1 and the national regulations
3.1
Laser Safety Precautions ............................................................................10
3.2
General Safety Precautions ........................................................................11