![background image](/i/olympus/171218/olympus-cell-frap/h/olympus-cell-frap-028.png)
22
Chapter 4 –
Overview and Laser Safety Setup
4.8
The Remote Interlock Connector of the Olympus
Soft Imaging Solutions ODB Laser Systems
An
INTERLOCK
connector can be found at the front panel of all Olympus Soft Imaging Solutions laser
systems as Class 3B laser products. This remote interlock connector of the dedicated FRAP laser must
be connected to the
INTERLOCK OUT
plug at the front panel of the
control via a Cinch cable.
Interlock connector
Caution.
Class 3B laser products not in use must be protected against unauthorized use
by removal of the key from the key control.
In order to comply with laser safety regulations the interlock connectors of non-Olympus Soft Imaging
Solutions laser systems must be connected in the same way.