![background image](/i/zelmer/164443/zelmer-32z013/h/zelmer-32z013-028.png)
30
Then rinse it under clean running water and dry.
●
If you left the jug for longer time without cleaning and
●
some particles glued to the jug inner, use nylon brush.
We do not recommend cleaning the jug
●
(3)
, blades
(6)
,
lid
(5)
and feeder opening stopper
(1)
in dish washer.
Aggressive cleaning agents applied in such device can
influence negative the surface conditions.
Clean the outsider of the motor housing
●
(8)
with damp,
gentle cloth.
ATTENTION: Do not immerse the motor housing (10) in
water or other liquid.
Do not clean the outside of the housing
●
(10)
with
aggressive detergents such as emulsion milk or pastes,
etc. They can remove information graphic symbols.
Do not clean the transparent jug
●
(3)
with harsh sponges
or clothes.
After washing dry thoroughly all the parts of the
●
appliance.
Disassembling of the cutting unit
Disconnect the plug of the supply cord from the mains
●
supply outlet.
Empty the blender jug
●
(3)
.
Remove the lid
●
(5)
from the blender jug
(3)
. Turn the
blender jug
(3)
„upside down” and place it on the flat, firm
surface.
Hold the blender jug with one hand
●
(3)
, and rotate the
blade unit (in clockwise direction).
Remove carefully the blade unit
●
(6)
including the
gasket
(8)
.
ATTENTION: The blades are sharp. Handle them
carefully.
Assembling of the cutting unit
Assemble the gasket
●
(8)
on the blade unit flange
(6)
.
Remove the lid
●
(5)
from the blender jug
(3)
. Turn the
blender jug
(3)
„upside down” and place it on the flat, firm
surface.
Insert the blade unit
●
(6)
into the inlet on the bottom of the
blender jug
(3)
.
Lock the blade unit
●
(6)
rotating it counterclockwise until
it moves.
Ecology – environment protection
Each user can protect the natural environment. It is neither
difficult nor expensive.
In order to do it: put the cardboard packing into
recycling paper container; put the polyethylene
(PE) bags into container for plastic.
When worn out, dispose the appliance to
particular disposal centre, because of the
dangerous elements of this appliance, which
can be hazardous for natural environment.
Do not dispose into the domestic waste disposal!!!
The manufacturer/importer does not accept any liability for any
damages resulting from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product
any time in order to adjust it to law regulations, norms, directives,
or due to construction, trade, aesthetic or other reasons, without
notifying in advance.