Chapter 9 VLAN
ES3500 Series User’s Guide
105
9.5.4 Configure VLAN Port Settings
Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) settings on a port.
See
for more information on static VLAN. Click the VLAN Port Setting link
in the VLAN Status screen.
Figure 43
Advanced Application > VLAN > VLAN Port Setting
The following table describes the labels in this screen.
Tagging
Select TX Tagging if you want the port to tag all outgoing frames transmitted with this
VLAN Group ID.
Add
Click Add to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Clear
Click Clear to start configuring the screen again.
VID
This field displays the ID number of the VLAN group. Click the number to edit the VLAN
settings.
Active
This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).
Name
This field displays the descriptive name for this VLAN group.
Delete
Click Delete to remove the selected entry from the summary table.
Cancel
Click Cancel to clear the Delete check boxes.
Table 23
Advanced Application > VLAN > Static VLAN (continued)
LABEL
DESCRIPTION
Table 24
Advanced Application > VLAN > VLAN Port Setting
LABEL
DESCRIPTION
GVRP
GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way for
switches to register necessary VLAN members on ports across the network.
Select this check box to permit VLAN groups beyond the local Switch.
Port
This field displays the port number.