Chapter 9 VLAN
ES3500 Series User’s Guide
110
9.9 Configuring Protocol Based VLAN
Click Protocol Based VLAN in the VLAN Port Setting screen to display the configuration screen
as shown.
Figure 47
Advanced Application > VLAN > VLAN Port Setting > Protocol Based VLAN
The following table describes the labels in this screen.
Table 26
Advanced Application > VLAN > VLAN Port Setting > Protocol Based VLAN Setup
LABEL
DESCRIPTION
Active
Select this to activate this protocol based VLAN.
Port
Type a port number to be included in this protocol based VLAN.
This port must belong to a static VLAN in order to participate in a protocol based VLAN. See
for more details on setting up VLANs.
Name
Enter up to 32 alphanumeric characters to identify this protocol based VLAN.
Ethernet-type
Select a predefined protocol to be included in this protocol based VLAN or select Others and
type the protocol number in hexadecimal notation. For example, the IP protocol in
hexadecimal notation is 0800, and Novell IPX protocol is 8137.
Note: Protocols in the hexadecimal number range of 0x0000 to 0x05ff are not allowed to be
used for protocol based VLANs.
VID
Enter the ID of a VLAN to which the port belongs. This must be an existing VLAN which you
defined in the Advanced Applications > VLAN screens.
Priority
Select the priority level that the Switch will assign to frames belonging to this VLAN.
Add
Click Add to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Index
This is the index number identifying this protocol based VLAN. Click on any of these numbers
to edit an existing protocol based VLAN.