ES3500 Series User’s Guide
335
C
H A P T E R
4 6
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•
Power, Hardware Connections, and LEDs
•
•
46.1 Power, Hardware Connections, and LEDs
The Switch does not turn on. None of the LEDs turn on.
1
Make sure the Switch is turned on.
2
Make sure you are using the power adaptor or cord included with the Switch. For the ES3500-8PD,
make sure the upstream PSE is connected to port 9 and the PD LED is on.
3
Make sure the power adaptor or cord is connected to the Switch and plugged in to an appropriate
power source. Make sure the power source is turned on.
4
Turn the Switch off and on.
5
Disconnect and re-connect the power cord to the Switch.
6
If the problem continues, contact the vendor.
The ALM LED is on.
1
Turn the Switch off and on.
2
Disconnect and re-connect the power adaptor or cord to the Switch.
3
If the problem continues, contact the vendor.