Инструкция для ZYXEL ES3500-24HP

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Chapter 7 System Status and Port Statistics

ES3500 Series User’s Guide

Link

For Ethernet ports, this field displays the speed (10M for 10Mbps or 100M for 100Mbps) and
duplex (F for full duplex or H for half) settings.

For dual-personality interfaces with the RJ-45 port active, this field displays the speed (10M
for 10Mbps, 100M for 100Mbps or 1000M for 1000Mbps), duplex (F for full duplex or H for
half) and media type (Copper) settings.

For dual-personality interfaces with the SFP port active, this field displays the speed (100M
for 100Mbps or 1000M for 1000Mbps), duplex (F for full duplex or H for half) and media
type (Copper or Fiber) settings.

This field displays Down if the port is not connected to any device.

Status

If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port (see

Section 13.1 on page 124

for more information).

If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it displays
STOP.

LACP

This field shows if LACP is enabled on this port or not.

TxPkts

This field shows the number of transmitted frames on this port

RxPkts

This field shows the number of received frames on this port

Errors

This field shows the number of received errors on this port.

Tx KB/s

This field shows the number kilobytes per second transmitted on this port.

Rx KB/s

This field shows the number of kilobytes per second received on this port.

Up Time

This field shows the total amount of time the connection has been up.

Tx Packet

The following fields display detailed information about packets transmitted.

Unicast

This field shows the number of good unicast packets transmitted.

Multicast

This field shows the number of good multicast packets transmitted.

Broadcast

This field shows the number of good broadcast packets transmitted.

Pause

This field shows the number of 802.3x Pause packets transmitted.

Rx Packet

The following fields display detailed information about packets received.

Unicast

This field shows the number of good unicast packets received.

Multicast

This field shows the number of good multicast packets received.

Broadcast

This field shows the number of good broadcast packets received.

Pause

This field shows the number of 802.3x Pause packets received.

TX Collision

The following fields display information on collisions while transmitting.

Single

This is a count of successfully transmitted packets for which transmission is inhibited by
exactly one collision.

Multiple

This is a count of successfully transmitted packets for which transmission was inhibited by
more than one collision.

Excessive

This is a count of packets for which transmission failed due to excessive collisions. Excessive
collision is defined as the number of maximum collisions before the retransmission count is
reset.

Late

This is the number of times a late collision is detected, that is, after 512 bits of the packets
have already been transmitted.

Error Packet

The following fields display detailed information about packets received that were in error.

Table 12

Status: Port Details (continued)

LABEL

DESCRIPTION