![background image](/i/zyxel/144645/zyxel-nwa1100-n/h/zyxel-nwa1100-n-103.png)
Chapter 12 Remote Management
NWA1100-N User’s Guide
103
System Timeout
There is a default system management idle timeout of five minutes (three hundred seconds). The
NWA automatically logs you out if the management session remains idle for longer than this
timeout period. The management session does not time out when a statistics screen is polling.
12.4 The Telnet Screen
Use this screen to configure your NWA for remote Telnet access. You can use Telnet to access the
NWA’s Command Line Interface (CLI).
Click
REMOTE MGNT
>
TELNET
. The following screen displays.
Figure 52
Remote Management: Telnet
The following table describes the labels in this screen.
Table 32
Remote Management: Telnet
LABEL
DESCRIPTION
TELNET
Server Port
You can change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Server
Access
Select the interface(s) through which a computer may access the NWA using Telnet.
Secured
Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the NWA
using this service.
Select
All
to allow any computer to access the NWA using this service.
Choose
Selected
to just allow the computer with the IP address that you specify to access
the NWA using this service.
Secured
Client MAC
Address
Select
All
to allow any computer to access the NWA using this service.
Choose
Selected
to just allow the computer with the MAC address that you specify to
access the NWA using this service.
Apply
Click
Apply
to save your customized settings and exit this screen.
Reset
Click
Reset
to begin configuring this screen afresh.