![background image](/i/zyxel/144645/zyxel-nwa1100-n/h/zyxel-nwa1100-n-067.png)
Chapter 6 Multi SSID Screen
NWA1100-N User’s Guide
67
When the NWA is set to Access Point, AP + Bridge or MBSSID mode, you need to choose the SSID
profile(s) you want to use in your wireless network (see
for more
information on operating modes).
To configure the settings of your SSID profile, you need to know the Media Access Control (MAC)
addresses of the devices you want to allow access to it.
Each SSID profile references the settings configured in the following screens:
•
Wireless
>
Security
(one of the security profiles)
•
Wireless
>
RADIUS
(one of the RADIUS profiles)
•
Wireless
>
MAC Filter
(the MAC filter list, if activated in the SSID profile)
Configure the fields in the above screens to use the settings in an SSID profile.
6.2 The Multi SSID Screen
Use this screen to select the SSID profile you want to configure. Click
Wireless
>
Multi SSID
to
display the screen as shown.
Figure 25
Wireless > Multi SSID
The following table describes the labels in this screen.
Figure 26
Wireless > Multi SSID
LABEL
DESCRIPTION
Multi SSID
Index
This field displays the index number of each SSID profile.
Profile Name
This field displays the identification name of each SSID profile on the NWA.
SSID
This field displays the name of the wireless profile on the network. When a wireless
client scans for an AP to associate with, this is the name that is broadcast and seen in
the wireless client utility.
Security
This field indicates which security profile is currently associated with each SSID
profile. See
for more information.