![background image](/i/zyxel/144645/zyxel-nwa1100-n/h/zyxel-nwa1100-n-104.png)
Chapter 12 Remote Management
NWA1100-N User’s Guide
104
12.5 The FTP Screen
Use this screen to upload and download the NWA’s firmware using FTP. To use this feature, your
computer must have an FTP client.
To change your NWA’s FTP settings, click
REMOTE MGMT
>
FTP
. The following screen displays.
Figure 53
Remote Management: FTP
The following table describes the labels in this screen.
12.6 The WWW Screen
Use this screen to configure your NWA via the World Wide Web (
WWW)
using a Web browser. This
lets you specify which IP addresses or computers are able to communicate with and access the
NWA.
Table 33
Remote Management: FTP
LABEL
DESCRIPTION
FTP
Server Port
You may change the server port number for a service if needed, however you must use
the same port number in order to use that service for remote management.
Server Access
Select the interface(s) through which a computer may access the NWA using this
service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the NWA
using this service.
Select
All
to allow any computer to access the NWA using this service.
Choose
Selected
to just allow the computer with the IP address that you specify to
access the NWA using this service.
Secured Client
MAC Address
Select
All
to allow any computer to access the NWA using this service.
Choose
Selected
to just allow the computer with the MAC address that you specify to
access the NWAe using this service.
Apply
Click
Apply
to save your customized settings and exit this screen.
Reset
Click
Reset
to begin configuring this screen afresh.