![background image](/i/zyxel/144645/zyxel-nwa1100-n/h/zyxel-nwa1100-n-122.png)
Chapter 15 Maintenance
NWA1100-N User’s Guide
122
Do not turn off the NWA while firmware upload is in progress!
After you see the
Firmware Upload in Process
screen, wait two minutes before logging into the
NWA again.
Figure 66
Firmware Upload In Process
The NWA automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 67
Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the
Status
screen.
If the upload was not successful, the following screen will appear. Click
Return
to go back to the
F/
W Upload
screen.
Figure 68
Firmware Upload Error
Browse...
Click
Browse...
to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload
Click
Upload
to begin the upload process. This process may take up to two minutes.
Table 43
Firmware Upload (continued)
LABEL
DESCRIPTION