107
E
Using a Memory Card
Recording Still Images on a Memory Card
2
1
4
3
You can record still images onto a memory card. In addition to the still images
you record directly onto the memory card, you can record images from a tape in
the camcorder, or images input via the DV terminal or AV terminal onto the
memory card.
Cautions:
• When you are using an SD Memory Card, make sure the protect switch is set to
allow recording.
• While the card access indicator flashes, do not turn off the camcorder,
disconnect the power source or remove the memory card. Doing so could result
in data damage.
Note:
• Make sure a memory card with enough memory available is inserted into the
camcorder.
1. Press and hold the small button on the POWER switch and turn
the POWER switch to CAMERA.
2. Move the TAPE/CARD switch to CARD.
• The number of images that can still be recorded on the memory card, and
other information appear in the display.
• The camcorder will turn itself off if you are using a battery and do not
operate the camcorder for more than 5 minutes. Set the POWER switch to
OFF and then back to CAMERA.
3. Press the PHOTO button halfway and hold it.
• Exposure is locked.
• During autofocus
F
flashes white in the display as the camcorder adjust the
focus and it is displayed continuously as a green mark when the camcorder
is ready to take the still image.
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY (VCR)
Recording with the Camcorder
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
