14
E
Mastering
the Basics
Charging the battery pack
Your battery pack has been partially charged before it left the factory. It should
have enough power for you to check that your camcorder is working properly.
Charge the battery pack fully using the Battery Charger CB-2LTE if you want it
to power the camcorder for more than a few minutes.
Always turn the camcorder off before attaching/removing the battery pack.
1. Connect the power cable to the charger.
2. Attach the battery pack to the charger.
• Align the front end of the battery pack with the guides on the charger, then
press and slide the battery pack into the charger to set it in place.
3. Plug the AC plug into a household power socket.
• The charge indicator lights in red and charging starts.
• The indicator light changes to green when the battery pack is fully charged.
4. Unplug the charger from the household power socket.
5. Remove the battery pack by sliding it out.
6. Disconnect the power cable form the charger.
Note:
• You can find details on using the battery pack in the “Notes on Using the
Battery Pack” (
146). These notes include charging and recording times and
how to install the backup battery.
1
2
3
CHARGE indicator
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
