112
E
Using a Memory Card
Recording Motion JPEG Movies on a Memory Card
You can record Motion JPEG movies with the camcorder, from a tape in the
camcorder, or from devices connected via the AV terminal (analog line-in) or the
DV terminal.
Cautions:
• When you are using an SD Memory Card, make sure the protect switch is set to
allow recording.
• While the card access indicator flashes, do not turn off the camcorder,
disconnect the power source or remove the memory card. Doing so could result
in data damage.
• Do not load/unload a tape during recording. Sound will not be recording during
this operation.
Notes:
• Make sure a memory card with enough memory available is inserted into the
camcorder.
• The sound of a movie recorded on a memory card will be monaural.
1. Turn the camcorder’s POWER switch to CAMERA, and move the
camcorder’s TAPE/CARD switch to CARD.
2. Press the start/stop button.
• You can record up to 10 seconds in 320
×
240 and 30 seconds in 160
×
120.
• Press the start/stop button to end recording.
• The camcorder starts to write the movie to the memory card when recording
is finished.
Note:
• For using the self-timer (
71), set the self-timer before step 2, and then press
the start/stop button.
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY (VCR)
Recording with the Camcorder
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
