![background image](/i/dell/154051/dell-3000cn/h/dell-3000cn-144.png)
Now, all software settings screen shots are from WORD, this was done in Word. However if in any application, you go
File
®
and then click the
Properties
button, you will get this same driver properties window.
26. Open up Word and create a new document.
27. Go to
File
®
.
28. Select the
Dell Color Laser Printer
from the printers list.
29. Click the
Properties
button to the right.
30. This brings up Driver Properties.
31. Click on the
Paper Tray
Tab.
32. Change the Paper Source to
Tray 1
.
33. Click the
Paper
Tab.
34. Select in
paper size
,
Letter
.
35. Select for
Output Size
,
Same as Paper Size
.
36. Click
OK
.
37. Click
Close
.
38. Now the printer driver is setup correctly.
39. Now go to
File
®
Page Setup
.
40. Click the
Paper
Tab.
41. Change Paper Size to Legal.
42. Change the Paper source settings BOTH to "DEFAULT TRAY AS PER PRINTER".
43. Click
OK
.
44. Type in some gibberish in the body of the document and click Print!
Setup printing Letter Plain 1 from Tray 2
1. On the printer operator panel press
MENU
.
2. Press to get to
Tray Settings
.
3. Press to select
Tray Settings
.
4. Press to get to
Paper Size
. (ONLY ON 3x00cn)
5. Press to select
Paper Size
. (ONLY ON 3x00cn)
6. Press to get to
Tray 2
. (ONLY ON 3x00cn)
7. Press to select
Tray 2
. (ONLY ON 3x00cn)
8. Using and , select the appropriate paper size (Letter). (ONLY ON 3x00cn)
9. Press the middle button,
SELECT
, once Letter is displayed on the lower line, this puts a * by it. (ONLY ON 3x00cn)
10. Now we have the
Tray 2
Size set to Letter. (ONLY ON 3x00cn)