![background image](/i/dell/154051/dell-3000cn/h/dell-3000cn-076.png)
Initializing NVRAM
You can restore the original factory default menu settings by initializing NVRAM.
1. Press
Menu
.
2. Press until
Configure
appears, and then press or .
3. Press until
Maintenance
appears, and then press or .
4. Press until
Init NVRAM
appears, and then press or .
5. The
Init NVRAM Are you sure?
message appears on the operator panel. Press .
6. Turn off the printer, and then on again.
Initializing NVRAM from Network settings
You can initialize IP Address by initializing NVRAM from Network settings.
1. Press
Menu
.
2. Press until
Configure
appears, and then press or .
3. Press until
Network
appears, and then press or .
4. Press until
Init NVRAM
appears, and then press or .
5. The
Init NVRAM Are you sure?
message appears on the operator panel. Press .
6. Turn off the printer, and then on again.