Installing the Toner and Drum Cartridges
Installing the Toner Cartridge
CAUTION:
Before performing any of the following procedures, read and follow the safety instructions in
your
Owner's Manual
.
Installing the Toner Cartridge
Install or replace the toner cartridge while the printer is on (if the power is not on, the cartridge carrier will not rotate).
1. After confirming the
Insert Yellow Toner(Y)
message, open the front door.
2. Hold the tape on the protective cover and pull it forward to remove the cover from each cartridge slot.
NOTE:
You need to remove the protective cover only the first time that you install the toner.
NOTE:
Dispose of the protective cover after you remove it.
NOTE:
The protective cover is attached to each toner cartridge mount.
3. Make sure the color of the toner cartridge matches the slot on the toner cartridge carrier. The order is Y, M, C, K.
Gently shake the cartridge to distribute the toner evenly.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
