Using Your Printer

35

Initializing NVRAM

You can restore the original factory default menu settings by initializing NVRAM.

1.

Press 

Menu

.

2.

Press  

until 

Configure

 appears, and then press 

 or 

.

3.

Press  

until 

Maintenance

 appears, and then press 

 or 

.

4.

Press  

until 

Init NVRAM

 appears, and then press 

 or 

.

5.

The 

Init NVRAM Are you sure?

 message appears on the operator panel. 

Press .

6.

Turn off the printer, and then turn it on again.

Setting of Panel Lock

This feature prevents unauthorized personnel from changing settings made by the printer 

administrator. For regular printing, items can be selected from the menu and printer settings 

remain unchanged.

For regular printing, items can be configured using the printer driver.

1.

Press 

Menu

.

2.

Press  

until 

Configure

 appears, and then press 

 or 

.

3.

Press  

until 

Security

 appears, and then press 

 or 

.

4.

Panel Lock

 is displayed. Press 

 or 

.

5.

Press  

until 

On

 appears, and then press 

.

6.

Press  .

7.

Press  

until 

Change Password

 appears, and then press 

 or 

.

8.

Enter the old password (when you enter it for the first time after doing the settings, enter 

0000

), and then press 

.

9.

Enter the new password, and then press 

. 

10.

Reenter the password to confirm the password that you entered, and then press 

.

The password has been changed.

NOTE: 

If you forget your password, turn off the printer. Then, while holding the Menu button, turn on the 

printer. This will recover the factory default menu settings. The factory default panel password is 

0000.