![background image](/i/dell/158138/dell-c1765nfw-c1765nf/h/dell-c1765nfw-c1765nf-128.png)
Port Settings
Purpose:
To enable or disable printing connectors and management protocol features.
NOTE:
The settings in the Port Settings page will be valid only when the printer is rebooted. When you change or configure the
settings, click Apply new settings to apply the new settings.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
Values:
Ethernet
*1
Ethernet Settings
Auto
*
Detects Ethernet transmission
rate and the duplex settings
automatically.
10Base-T Half-Duplex
Selects 10Base-T Half-Duplex as
the default value.
10Base-T Full-Duplex
Selects 10Base-T Full-Duplex as
the default value.
100Base-TX Half-Duplex
Selects 100Base-TX Half-Duplex
as the default value.
100Base-TX Full-Duplex
Selects 100Base-TX Full-Duplex
as the default value.
Current Ethernet Settings
Displays the current settings of Ethernet.
MAC Address
Displays the MAC address of the printer.
Port Status
LPD
Specifies whether to enable LPD.
Port9100
Specifies whether to enable Port9100.
E-Mail Alert
Specifies whether to enable the E-Mail Alert feature.
SNMP
Specifies whether to enable the SNMP.
WSD
Specifies whether to enable the WSD port.
Bonjour (mDNS)
Specifies whether to enable the Bonjour (mDNS) feature.
Status Messager
Specifies whether to enable the Status Messager.
*1
This item is available only when the printer is connected with a wired network.
Dell™ Printer Configuration Web Tool
126