![background image](/i/dell/158138/dell-c1765nfw-c1765nf/h/dell-c1765nfw-c1765nf-161.png)
Fax Settings
Purpose:
To configure the basic fax settings.
Values:
Receive Mode
Telephone
Automatic fax reception is turned off. You can receive a fax by picking up the
handset of the external telephone, and then pressing the remote receive code.
Fax
Automatically receives faxes.
Telephone/Fax
When the printer receives an incoming fax, the external telephone rings for the
time specified in
Auto Rec Fax/Tel
, and then the printer automatically receives a
fax. If an incoming call is not a fax, the printer beeps from the internal speaker
indicating that the call is a telephone call.
Ans Machine/Fax
The printer can share a telephone line with an answering machine. In this mode,
the printer will monitor the fax signal and pick up the line if there are fax tones. If
the phone communication is using serial transmission in your country (such as
Germany, Sweden, Denmark, Austria, Belgium, Italy, France and Switzerland), this
mode is not supported.
DRPD
Before using the Distinctive Ring Pattern Detection (DRPD) option, a distinctive
ring service must be installed on your telephone line by the telephone company.
After the telephone company has provided a separate number for faxing with a
distinctive ring pattern, configure the fax setup to monitor for that specific ring
pattern.
Auto Rec Fax
Available Range:
Sets the interval at which the printer goes into the fax receive mode after receiving
0–255 seconds
an incoming call.
Auto Rec Fax/Tel
Available Range:
Sets the interval at which the printer goes into the fax receive mode after the
0–255 seconds
external telephone receives an incoming call.
Auto Rec Ans/Fax
Available Range:
Sets the interval at which the printer goes into the fax receive mode after the
0–255 seconds
external answering machine receives an incoming call.
Line Monitor
Off
Turns off the volume of the line monitor.
Low
Specifies the volume of the line monitor, which audibly monitors a transmission
Medium
through the internal speaker until a connection is made.
High
Ring Tone Volume
Off
Turns off the volume of the ring tone.
Low
Specifies the volume of the ring tone, which indicates that an incoming call is a
Medium
High
telephone call through the internal speaker when
Receive Mode
is set to
Telephone/Fax
.
Line Type
PSTN
Sets the line type to PSTN.
PBX
Sets the line type to PBX.
Tone/Pulse
Tone
Sets the dialing type to Tone.
Pulse (10PPS)
Sets the dialing type to Pulse (10 pulse per second).
Pulse (20PPS)
*1
Sets the dialing type to Pulse (20 pulse per second).
Resend Delay
Available Range:
Specifies the interval between transmission attempts.
3–255 seconds
Redial Attempts
Available Range:
Specifies the number of redial attempts to make when the destination fax number
0–9
is busy. If you enter 0, the printer will not redial.
Understanding the Tool Box Menus
159