![background image](/i/dell/158138/dell-c1765nfw-c1765nf/h/dell-c1765nfw-c1765nf-041.png)
WPS-PBC (Operator Panel Menu)
You can start WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) from the operator panel.
NOTE:
WPS-PBC is available only when the wireless LAN access point (Registrar) or router supports WPS-PBC.
NOTE:
Before starting WPS-PBC, confirm the position of the WPS button (button name may vary) on the wireless LAN access
point (Registrar) or router. For information about WPS operation on the wireless LAN access point (Registrar) or router, refer to
the manual supplied with the product.
NOTE:
A Password is required to enter
Admin Menu
when
Panel Lock Set
is set to
Enable
. In this case, enter the
password you specified, and press the
(Set) button.
1
Press the
b
(Menu)
button.
2
Press the
button until
System
appears, and then press the
(Set)
button.
3
Press the
button until
Admin Menu
appears, and then press the
(Set)
button.
4
Press the
utton until
Network
appears, and then press the
(Set)
button.
5
Press the
button until
WPS
appears, and then press the
(Set)
button.
6
Ensure that
Push Button Control
appears, and then press the
(Set)
button.
7
Ensure that
Yes
appears, and then press the
(Set)
button.
Ensure that
Press WPS Button on WPS Router
is displayed, and start the WPS-PBC on the wireless LAN
access point (Registrar) or router within two minutes.
8
When the WPS operation is successful and the printer is rebooted, wireless LAN connection setting is completed.
Connecting Your Printer
39