![background image](/i/dell/158138/dell-c1765nfw-c1765nf/h/dell-c1765nfw-c1765nf-043.png)
Manual SSID Setup
NOTE:
A Password is required to enter
Admin Menu
when
Panel Lock Set
is set to
Enable
. In this case, enter the
password you specified, and press the
(Set) button.
1
Press the
(Menu)
button.
2
Press the
button until
System
appears, and then press the
(Set)
button.
3
Press the
button until
Admin Menu
appears, and then press the
(Set)
button.
4
Press the
button until
Network
appears, and then press the
(Set)
button.
5
Press the
button until
Wireless Setup
appears, and then press the
(Set)
button.
6
Press the
button until
Manual Setup
appears, and then press the
(Set)
button.
7
Enter the SSID, and then press the
(Set)
button.
8
Select the network mode from
Infrastructure
and
Ad-hoc
depending on your environment, and then press
the
(Set)
button.
If you select
Infrastructure
, proceed to step 9.
If you select
Ad-hoc
, proceed to step 10.
9
Select the encryption type from
No Security, Mixed mode PSK
,
WPA-PSK-TKIP
,
WPA2-PSK-AES
, or
WEP
.
If you do not set security for your wireless network:
•
Press the
button until
No Security
appears, and then press the
(Set)
button.
To use Mixed mode PSK, WPA-PSK-TKIP, or WPA2-PSK-AES encryption:
a
Press the
button until
Mixed mode PSK
,
WPA-PSK-TKIP
, or
WPA2-PSK-AES
appears, and then
press the
(Set)
button.
b
Enter the passphrase, and then press the
(Set)
button.
NOTE:
A passphrase is an encryption key for WPA and WPA2 encryption which consists of 8 to 63 alphanumeric
characters. It may be described as a key on some access points or routers. For details, refer to the manual supplied with
the access point or router.
To use WEP encryption:
a
Press the
button until
WEP
appears, and then press the
(Set)
button.
b
Enter the WEP key, and then press the
(Set)
button.
c
Press the
button to highlight the desired transmit key from
WEP Key 1
to
WEP Key 4
, and then press
the
(Set)
button.
Proceed to step 11.
10
Select the encryption type from
No Security
or
WEP
.
If you do not set security for your wireless network:
• Ensure that
No Security
appears, and then press the
(Set)
button.
To use WEP encryption:
a
Press the
button until
WEP
appears, and then press the
(Set)
button.
b
Enter the WEP key, and then press the
(Set)
button.
c
Press the
button to highlight the desired transmit key from
WEP Key 1
to
WEP Key 4
, and then press
the
(Set)
button.
11
The
Restart System
screen appears and the printer is rebooted, wireless LAN connection setting is completed.
Connecting Your Printer
41