![background image](/i/dell/158138/dell-c1765nfw-c1765nf/h/dell-c1765nfw-c1765nf-319.png)
3
4
Clean the CTD sensor inside the printer with a clean dry cotton swab.
Close the rear cover.
5
Turn on the printer.
Adjusting Color Registration
This section describes how to adjust the color registration when you first install the printer or after moving it to a
new location.
NOTE:
A Password is required to enter the
Admin Menu
menu when
Panel Lock Set
is set to
Enable
. In this case,
enter the password you specified, and press the
(Set) button.
Performing Auto Adjust
Auto Adjust
allows you to correct the color registration automatically.
The Operator Panel
1
Press the
(Menu)
button.
2
Press the
button until
System
is highlighted, and then press the
(Set)
button.
3
Press the
button until
Admin Menu
is highlighted, and then press the
(Set)
button.
4
Press the
button until
Maintenance
is highlighted, and then press the
(Set)
button.
5
Press the
button until
Adjust ColorRegi
is highlighted, and then press the
(Set)
button.
6
Ensure that
Auto Adjust
is highlighted, and then press the
(Set)
button.
Maintaining Your Printer
317